{
    "bottom_shell_layers": "5",
    "bottom_surface_pattern": "monotonicline",
    "bridge_flow": "1",
    "compatible_printers": [
        "Creality K1 Max - 0.4 nozzle"
    ],
    "default_acceleration": "12000",
    "detect_thin_wall": "1",
    "elefant_foot_compensation": "0.15",
    "enable_arc_fitting": "1",
    "enable_support": "1",
    "filename_format": "[input_filename_base].gcode",
    "from": "User",
    "gap_infill_speed": "230",
    "infill_wall_overlap": "15%",
    "inherits": "0.24mm Draft @MyKlipper",
    "initial_layer_speed": "60",
    "inner_wall_speed": "230",
    "internal_solid_infill_line_width": "0.42",
    "internal_solid_infill_pattern": "zig-zag",
    "internal_solid_infill_speed": "230",
    "is_custom_defined": "0",
    "line_width": "0.42",
    "name": "0.24mm - Creality K1 Max",
    "outer_wall_acceleration": "5000",
    "outer_wall_line_width": "0.42",
    "outer_wall_speed": "200",
    "overhang_1_4_speed": "60",
    "overhang_2_4_speed": "30",
    "overhang_3_4_speed": "10",
    "print_settings_id": "0.24mm - Creality K1 Max",
    "seam_gap": "15%",
    "skirt_speed": "60",
    "sparse_infill_acceleration": "12000",
    "sparse_infill_density": "10%",
    "sparse_infill_pattern": "gyroid",
    "sparse_infill_speed": "230",
    "support_base_pattern": "default",
    "support_interface_speed": "100",
    "support_line_width": "0.42",
    "support_speed": "230",
    "support_type": "tree(manual)",
    "top_shell_layers": "5",
    "top_shell_thickness": "0.6",
    "top_surface_acceleration": "2000",
    "top_surface_line_width": "0.42",
    "top_surface_pattern": "monotonicline",
    "top_surface_speed": "200",
    "travel_acceleration": "12000",
    "travel_jerk": "30",
    "travel_speed": "500",
    "tree_support_branch_diameter": "2",
    "tree_support_wall_count": "2",
    "version": "1.6.1.0",
    "wall_generator": "classic",
    "wall_loops": "2",
    "wall_sequence": "inner-outer-inner wall"
}